Smart Unlocker

Smart Unlocker is a new product by Smart-Clip team (GsmServer).

This product came as our response to many of those who choose to buy Smart-Clip only for unlocking and have to save long before they purchase it. Because of its low price Smart Unlocker becomes a must-have for every unlocker on all continenets of the world.

It unlocks Motorola and Sendo cell phones within seconds. Smart Unlocker is a simple (like Smart-Clip) standalone device that removes SP/SIM/phone lock and resets Security/User code in phones.

The current list of supported phone models by Unlocker fully reflects the list of models supported by Smart-Clip up-to-date.
Smart Unlocker is upgradable via internet in real time.

The function of Unlocker is described by its name - it is meant for unlocking phones only

Currently supported popular phone models
Motorola Cxxx: C975, C250, C260, C266, C330, C331, C332, C333, C334, C335, C336, C350, C350L, C350V, C353, C359V, C370, C450, C450L, C550, C650, C350L-R312ULS_G_09.10.2CR, C385, C380, C115, C236, C268, C335V, C116, C117, C155, C156 and others
Motorola Exxx: E1000, E380, E370, E396, E398, E365, E378i and others
Motorola Vxxx: V980, V150, V151, V300, V303, V400, V500, V525, V551, V600, V220, V180, V505, V171, V975 (ver R245_xxx), V170, V1050 and others
Motorola Vxx OLD: V60, V66, V60i, V66i, V70 and others
Motorola Vxx NEW: V3, V80, V80 (incl. R37_G_0E.03.26R) and others
Motorola Txxx: T280, T720, T720i, T722i, T720-T720_G_05_08_81R , T721, T280i and others
Motorola Axxx: A1000, A835, A920, A925, A845, A835, A630 and others
Sendo Seria S2xx/S3xx/P2xx/M5xx/S6xx: SND200, SND230, P200, P230, M550, S600, SND800 and others
List of all supported cell phone models

Package contents

Smart Unlocker device
Cables for Motorola c,v series
Battery connector


--------------------------------------------------------------------------------
Sendo snd2xx/snd3xx/snd5xx/snd6xx/snd8xx unlocking procedure
Power off the phone
Connect clip to the phone using RJ45 cable (pinouts below)
Press UNLOCK button
Press Power button on the phone within 5 seconds after you press UNLOCK button on a clip. RX/TX leds will blink
E/G led will glow green on success.
When you unlock Sendo phone use either fully charged phone battery OR power supply from Smart Unlocker. Don't use them both at the same time! If you use power supply from Smart Unlocker, make sure current is not less than 300mA, otherwise not all data will be properly recorded to the phone.
Pinout Sendo snd2xx snd3xx snd6xx
Pinout Sendo snd5xx
Pinout Sendo snd8xx

Motorola V18x/V22x/C65x/C38x (newer versions), C975/V980/E1000 (Boot Loader 0.6.1.2) unlocking note Unlocking newer versions of V18x/V22x/C65x/C38x or C975/V980/E1000 (Boot Loader 0.6.1.2) may require additional user intervention.
It may happen that E/G led still blinks after display turns off - it means that you have to turn the phone ON manually within 2-3 seconds after display turns off; alternatively you can try to unlock this newer version of V18x/V22x/C65x/C38x with battery charger on.


Unlock procedure for Motorola A920/A925/A1000

Power the phone on.
Connect the phone to a powered clip. Phone display should give "USB cable connected" message.
Press UNLOCK button on the clip.
Phone reloads. Within 5-10 seconds phone display gives "Waiting for PST" message.
Press A and B keys simultaneously in upper part of the handset. The phone enters boot mode (if you don't press these 2 keys during "Waiting for PST" message, the clip will give red E/G led and you will have to start with step 1 again).
After A and B keys have been pressed E/G green led will blink and phone reboots. Meanwhile E/G will give frequent green blinking and phone will turn on.
Do not disconnect cell phone from Smart Unlocker while green led indicator blinks!
Green E/G led glows. The cell phone is unlocked.

Motorola Axxx/Exxx/Vxxx unlocking note
Don't unplug cable right after phone reboot, wait until E/G led stops blinking!

Motorola E396/E398 unlocking note Remove flash card from phone before unlocking


Motorola C115/C116/C155/C156/E365/V171 unlocking procedure

Power off the phone
Connect clip to the phone using RJ45 cable (pinouts below)
Press UNLOCK button
Press Power button on the phone within 5 seconds after you press UNLOCK button on a clip. RX/TX leds will blink
E/G led will glow green on success *
* After successful unlock (green led on) phones with inserted sim card may ask for PCK or NCK code. Enter 00000000 ("zero" 8 times)
Pinout Motorola C115 C116 C155 C156 V171
Pinout Motorola E365
Warranty
6 months
Please note that cables are the accessories and are not covered by warranty